We will share the different clipper blade sharpening machines with you in this detailed review of the Best Clipper Blade Sharpening Machine for you to use to sharpen your clippers.
It is a really daunting process to cut hair with a clipper that has a rusty blade. Although, technology in these shaving devices has advanced in recent years when compared to what we had in the 90s.
Your haircut will begin to hurt the moment your clipper starts to get dull. No matter how good it is. This is one of the reasons why it is important to sharpen your clipper blades.
There is some beneficial information about sharpening clipper blades that I will unveil in this guide.
In today’s article, we shall look at how you can use sharpening machines to rejuvenate your dull clipper blades by sharpening them properly. You also get the best clipper blades sharpening machines fully reviewed in this article.
But hold on!
Before we continue, let me draw your attention to the other side of the coin. Can you say if your clipper blades really need sharpening?
It is important to know because brands nowadays make blades that are ‘self-sharpening’. These kinds of blades have been adjusted to the proper angle so that it doesn’t require sharpening.
If you want to know if your clipper blades are really self-sharpening, or you want to know how to use clippers with self-sharpening blades then this article HERE has all you need
If you detach your clipper and find out that the blade’s sharpness has been improved, then there is no need for even buying sharpening tools in the first place.
Best clipper blade sharpening machine review
- 1 Best clipper blade sharpening machine review
- 2 Things you need before sharpening clipper blades with machine
- 3 How to sharpen hair clipper blade with a sharpening machine
- 4 Clipper blade sharpening cost?
- 5 Crucial tips to consider when sharpening clipper blades with machine
- 6 Frequently asked questions on sharpening clipper blades
- 6.1 How much does it cost to sharpen clipper blades?
- 6.2 Why are my Wahl Clippers not cutting?
- 6.3 Why are my Wahl clippers so loud?
- 6.4 Do hair clippers get dull?
- 6.5 Do you oil Clippers before use?
- 6.6 Why do hair clippers get hot?
- 6.7 Is it better to use clippers on wet or dry hair?
- 6.8 Can Clippers overheat?
- 7 Final words on Best Clipper Blade Sharpening Machine
TQ 220V Electric Sheep Clipper Blade Sharpener
This is another wonderful machine to buy for sharpening clipper blades.
Now, you no longer need to order more blades, one blade can cut for a long period of time. It also saves you a lot of money here.
Plus, you get 2 free abrasive papers which would be included in the package.
- It is very suitable for home use.
- Not only does it aim at a livestock farm, but also for clipper blades
- A perfect replacement for the manual sharpening tools
- Large motor, strong power, makes it more sturdy and durable.
- It is easy to check the blades since It can be disassembled.
- High-quality all-steel grinding disc.
- Efficiency from the wear-resisting abrasive paper.
- With polishing function
- Strong power
- Quickly polish
- Thickening grinding disc
- Low noise design
- The movable rod can be adjusted flexibly
Work Sharp Wood Tool Sharpener
While the work Sharp Wood Tool Sharpener is a very ideal tool for any dull woodwork equipment, it is a great machine that people have been using to sharpen their hair clippers blades and works really fine.
It is very versatile as you can use it for both clipper blades and carving tools. So while you do good to your manscaping tool, you can also do justice to your workshop tools. It comes with an active air cooled sharpening port with routed airflow and heat sink design to quickly and easily sharpen flat blades without overheating or damaging the steel.
Powerful motor of 1/5 HP motor – with 580 rpm speed has routed airflow and a heat sink cooling system to sharpen blades fast without blade damaging heat.
It maintains a speed of improved consistency the low-rpm irrespective of the load.
And you can easily move from task to task with the two disk provided. This allows you to have four different grits ready to go on each wheel surface
- The ws-3000 is a bench mounted sharpening system and ideal for sharpening tools quickly and easily
- Perfect Honing solution for not just the discerning woodworker but clipper owners.
- Offers 3 ways to sharpen your tools: Top Side with Tool Rest, the Chisel and Plane Iron Port and the Edge-Vision Port.
- Very versatile – sharpens clipper blades, carving tools, lathe tools, scrapers, putty knives and more!
- Powerful motor 1/5 hp motor and produces a high torque max wheel speed of 580 RPM.
- Allows you to see the cutting edge of tools while you sharpen
WEN 4276 2.1-Amp 6-Inch Bench Grinder with Flexible Work Light
With the WEN 4276 2.1-Amp 6-Inch Bench Grinder with Flexible Work Light, you no longer have to spend all that money replacing dull rusty tools and clipper blades.
From deburring ragged edges to cleaning objects to sharpening blades, the WEN 6-inch Bench Grinder is one of the most recommended sharpening machines for any clipper blade or workshop tools.
With a quiet 2.1 amp motor, expect quick startups, smooth performance and steady speeds of 3450 RPM. You can change the wheel as the wheel guard has been made removal simple.
- 2.1-Amp motor
- 3450 RPM at no load
- 6 in. by 3/4 in. wheels, 1/2 in. arbour size
- Lightweight design weighs in at 16 lb. Lamp:120V
- Bench Grinder
- Eye Guards
- 36-Grit Wheel
- 60-Grit Wheel
- Heavy-duty Base
- Flexible Work Light
Tormek T4 Water Cooled Precision Sharpening System with 8-Inch Stone
Let’s talk of a very high-quality sharpening machine for hobby work, clipper blades and professional use.
The Tormek T-4 is a compact sharpening machine ideal for home also to sharpen all the common edge tools with the highest precision.
It allows You to shape/sharpen the tool exactly to your needs. Apart from clipper blades, Tormek T-4 is perfect your sharpening all your household tools like kitchen knives, scissors, axes, chisels, and outdoor knives.
You can also sharpen turning tools and drill bits with this machine. Plus, it is easy to move with the sturdy handle.
This machine can sharpen practically any type of edge tool.
- Complete Water-Cooled Sharpening system for edge tool like clipper blades
- Accessories Jigs available to assist you in achieving a better than factory blade edge quickly
- Comes with a comprehensive instruction manual and easy to follow instructional videos for achieving professional tool sharpening results
- Stainless Steel Hardware for long life coupled with a 7-year warranty
Things you need before sharpening clipper blades with machine
- A Screwdriver To Unscrew The Blade From The Clippers
- A Cleaning Brush To Clean Off The Hair And Dirt.
- A Sharpening Machine
- Clipper Oil To minimize The Friction Of Blade.
How to sharpen hair clipper blade with a sharpening machine
The steps on how to use these machines to sharpen your clipper blade is a very simple one if you follow these step-by-step instructions.
Here, the process has been Broken Down to Walk You Through the Start To The Very End.
Let me add that A Good Hair Clipper Can Save Up To A 500 To 1000 Buck A Year! So if you want to save that extra amount of money, you better pay attention to these steps.
The first step, just like when you want to sharpen using handy tools, you will need to Remove The Blades From The Hair Clippers.. Since the blades come attached with the hair clipper heads, all you need is a simple screwdriver to remove the two screws that are keeping the blade firmly glued to the clipper head.
It is indeed a very simple process.
Make sure you take note of how each part has been arranged before assembling them. So that when you want to attach them back, you won’t scratch your head unnecessarily.
This is a simple aspect but also requires much attention. While you unscrew some parts at the beginning Be Sure To Put them Together Where They Belong.
There are some clippers that are easy to detach and reattach by removing the clipper blade from the head. But when you come across a clipper that is not like this, you need to pay much attention to the details.
After removing the blades, the next thing to do is clean up the hair trash that has piled inside the small teeth holes of the blade. This is also an important step that you should not ignore.
It is important to clean up the clipper blades before even sharpening it. This link HERE will show you how to clean your blade properly before sharpening it with either machine or tools.
This is a sharpening process because you are removing the actual thing that makes the blade dull — the hair stuck.
And apart from sharpening, you should clean your clipper blades frequently. And at the end of the day, your clipper may not even need sharpening but proper cleaning.
I recommend that you clean The Blade After Each Use.
Use the brush that is included in the hair clipper to clean the long hairs stuck for a start.
If you can not locate this clipper brush then using the normal hairbrush is not a bad idea too. Since the shorter hairs that are stuck in the clipper blades need to be softened for easy removal.
Clean your blades with warm water, else, They Will Be Stuck There For A Long Time, And Blades Will Never Be Fully Sharp.
In the third step, we are using the sharpening machine. The sharpening machine is The Most Necessary Piece Of Equipment You Are Going To Use.
If you Have Some Experience With Sharpening Knives with a grinding machine, then this one should not be a problem.
And if you have no experience in using these machines then do not fret. You can rely on this guide as well as the instructional manual provided in those machines I shared with you.
It’s Relatively Easier To Sharpen The Blades With The Sharpening machine.
These machines Are Measured By A Special Scaling System Called Grit. The Number Of Grit a sharpening machine Has The More Finer The Polish Will Be.
There are various types of sharpening machines and for some, they are multipurpose.
Most people use circular saw sharpening machines to fine-tune the look of their clipper blades. As long as it has a strong mother and sandpaper thick, it is ideal.
You Need To Sharpen Both The Top And The Bottom of the clipper blade as well.
Angle It 45 Degrees And Start By Gently Pressing The Blade Against The fast-rolling Surface Of The machine. Rub Back And Forth On The Surface Of The machine.
At 10 intervals, the blades Should Be Smooth And Sharp By Now. Don’t forget that it applies to Both Edges.
Now that your clipper blades are sharpened. Switch off the machine and grab a clipper blade oil to oil the blades.
I can not overemphasize the need to oil your clipper blades after sharpening.
If you want your clipper to last for upcoming years, then you need to oil frequently.
Generally, Oil Is A Critical Component Of The Machine Keep the mechanism smooth. Due to The Increasing Amount Of Friction, your blade can damage pretty soon if you don’t oil them after each sharpening process.
Also when oiling the clipper blades, you want to avoid the liquid rolling down into the clipper case. Hence face it downwards
The final step is to test what you’ve been doing so far and see if you’ve accomplished the desired result.
It is time to reassemble the clipper and reattach all parts. Be extra careful so that you don’t place the cart before the horse.
Your hair clipper will not Work Properly if you do not rearrange them properly. Align the blades Properly and Put The Screws. Attach The Blades Again
Check The Clipper Is Working Properly By Running It For A Few Minutes Before using it.
And that’s it on sharpening your clipper blades with sharpening machines!
Clipper blade sharpening cost?
Just so you know, buying a new clipper blade will cost you on average between $22.00 to $30.00.
I hate to tell you but you have been wasting your money unnecessarily if you’ve been buying new clipper blades because you think it is too costly or time-consuming to get your clipper blades sharpened.
A clipper blade used once and thrown out is an expensive haircut for your customer or yourself at home
When sharpening with the manual process, it is recommended to sharpen your clipper up to 10 times.
If you choose to take it to a professional clipper blades sharpener, you can spend nothing less than $5.25 to $9.00 for a blade set. Depending on the type of blade.
If you decide to take matters into your own hands and DIY, you can get your blades sharpened up to 5 times the price of a new one.
So the choice is yours. I’ve provided the guideline on how to go about it using these machines in your homes. Nothing else is needed.
Crucial tips to consider when sharpening clipper blades with machine
One of the easiest and fastest maintenance tips of hair clipper blades is sharpening and oiling. While it is easy to do, it must not be ignored.
Using a clipper blade sharpening machine can save you a lot of hassle but you need to be aware of the potential threat if it is not done properly. If you ignore the tips below, your clipper blade is likely not to cut even when you sharpen them well. So pay attention.
- The first significant tip we shall look at here involves the Demagnetizing the clipper blades. Friction is set to occur as clipper blades run across each other at high speed when in use. To Aid smooth cut, use a powered demagnetizer to remove or reduce the friction. Friction can cause the clipper to chatter.
- Secondly, Make sure the spring tension is set correctly. The best way to measure the spring tension is to use a clipper blade test scale. The recommended pressure for the clipper is 2-3/4 and 3-1/4 pounds of pressure. Use a flat head screwdriver to remove spring tension, by spreading the spring clips apart. To add spring tension, take a plier and bend the spring clips towards each other.
- The socket of the clipper blade should be adjusted to the factory shape. It is possible for the ears in the socket to Flair outward. This is because the top cutter of the clipper blade moves to and from to cut hair when using the clipper. You can fix this problem by using the plier to bend the ears of the socket back straight but slightly.
- Lastly, you should pay attention when reassembling clipper after sharpening blades. Make sure the top cutter blade has the correct blade set back.
Frequently asked questions on sharpening clipper blades
How much does it cost to sharpen clipper blades?
Sharpening a clipper blade with a clipper machine will cost you nothing less than $5 but a Profesional clipper blade sharpener should not charge more than $9.
It is smart to sharpen your clipper blades than buying new blades that will cost you 5 times what you spend to sharpen your clipper blade.
Why are my Wahl Clippers not cutting?
Wahl Clipper is among the best reliable clipper to buy today. When you use Wahl Clipper there is blade alignment which is adjustable that needs a touch of reset after the blades have been removed.
Ignoring this will not allow your clipper to cut. Remember I mentioned that the top blade must not be placed together with the bottom blade, or else, it will cause skin pinching or cutting.
Why are my Wahl clippers so loud?
Sometimes, clippers get so loud as a result of improper alignment. From a nice smooth cut to a buzzing irritating sound. That is no good. When you experience something like this, it doesn’t mean your clipper is out of control, all you need to do is turn the power screw anti-clockwise around ¼ turn and test again.
Just know that you will need to re-align the clipper blade after tuning. Because really, the alignment of the cutting blade will be tampered with.
Do hair clippers get dull?
Depending on how sharp and quality the blades are, hair clipper can get dull after some time of frequent use. If you take care of your hair clipper properly and maintain them, they will not get dull any sooner.
Hair Clipper with self-sharpening blades feature will not require you to sharpen them because it does such by itself. Whenever your clipper gets dull, that doesn’t mean it is useless. Simply get one of the clipper blades sharpening machine listed in this article and sharpen them.
Do you oil Clippers before use?
Before you use your clipper, make sure that it is properly oiled. But be careful to not use too much oil as it has a negative impact. Hold the unit in such a way that the blades are in a downward position.
Add 3 drops of oil across the top blade and wipe off any oil that drips in the process. Make sure that oil does not get into the motor compartment.
Why do hair clippers get hot?
Hair Clipper gets really hot when they work harder than normal to cut hairs. This will happen when you fail to oil them before use. Lubrication of clipper blades makes them cooler when running.
Continuous heating up of the clipper can lead to a broken lever. So don’t take oiling for granted.
Is it better to use clippers on wet or dry hair?
Any hair that is short and straight can be cut when dry. But for curly hair, you should make them damp before cutting. While dry hair will cut much harder than wet hair, dry hair is ideal for shorter and straighter hairs.
Can Clippers overheat?
Do not underestimate the dangers of not oiling your clippers. Clippers will overheat when you fail to oil them. And ideally, clippers should be oils every 10 minutes during use.
The places to apply oil includes those holes positioned on the top of the clipper head as well as to and fro the blade length.
Can you use olive oil on clippers?
There are many alternatives to using clipper oil. If it is not affordable at the moment, you can use olive oil on clippers. This is because olive oil is Low-viscosity oil which has the ability to withstand extremely high temperatures.
Oil helps the blade to move faster and smoother. So do not be bothered about running out of clipper oil when you can use other types of oil like olive oil. It is a really good substitute that I recommend.
Final words on Best Clipper Blade Sharpening Machine
I want to believe this guide has shown you all you need to know about the best clipper blades sharpening machines available. And how to properly use them on your clipper blades.
Sharpening your clipper blades with durable machines is a crucial skill. And this depends on how often you use them.
Since it doesn’t take much effort to carry out these simple blades maintenance, then you should do it. Because a well-maintained clipper blade can, in the end, save a lot of money you would have spent in replacing things.
Reach out to me via the comment section if you’ve got any questions.